Do you find yourself constantly checking the tire pressure on your bike, only to be disappointed when the pressure gauge on your pump doesn’t seem to be working properly
If so, you’re not alone. Bike pump pressure gauges are notoriously unreliable, and can often lead to frustration and inconvenience.
But don’t despair! In this guide, I’ll show you how to troubleshoot a bike pump pressure gauge that’s not working, so you can get back to enjoying your rides without having to worry about your tires.
Most Common Reasons: Bike Pump Pressure Gauge Not Working
Most Common Reasons: Bike Pump Pressure Gauge Not Working
1. Defective Pressure Gauge
The most common reason for a bike pump pressure gauge not working is that the gauge itself is defective. This can happen if the gauge is damaged, or if the internal components have failed. To check if the gauge is defective, you can try replacing it with a new one.
2. Blocked Air Hose
Another common reason for a bike pump pressure gauge not working is that the air hose is blocked. This can happen if dirt or debris gets into the hose, or if the hose becomes kinked or twisted. To check if the air hose is blocked, you can try blowing through it. If you can’t blow through the hose, it is likely blocked and will need to be cleaned or replaced.
3. Low Air Pressure
If the air pressure in the bike tire is too low, the pressure gauge may not be able to provide an accurate reading. To check the air pressure in your tire, you can use a separate air pressure gauge. If the air pressure is too low, you will need to add air to the tire before you can use the pressure gauge.
4. Incorrect Tire Size
If you are using a bike pump that is not designed for the size of your tire, the pressure gauge may not be able to provide an accurate reading. To check if the tire size is correct, you can look at the sidewall of the tire. The tire size will be listed in inches, such as 700x25c.
5. Improper Use
Finally, if you are not using the bike pump correctly, the pressure gauge may not be able to provide an accurate reading. To use the bike pump correctly, you should follow the instructions that came with the pump. You should also make sure that you are not over-inflating the tire.
How to Troubleshoot: Bike Pump Pressure Gauge Not Working
Symptoms
The pressure gauge on your bike pump does not move when you pump air into your tire.
The pressure gauge reads incorrectly, even when you know the correct pressure for your tire.
The pressure gauge is damaged or broken.
Causes
There are a few possible causes for a bike pump pressure gauge not working.
The pressure gauge is not properly connected to the pump:
Make sure that the pressure gauge is securely attached to the pump and that the hose is not kinked or obstructed.
The pressure gauge is dirty or damaged:
Clean the pressure gauge with a dry cloth and inspect it for damage. If the pressure gauge is damaged, it will need to be replaced.
The pump is not working properly:
If the pump is not working properly, it may not be able to generate enough pressure to move the pressure gauge. Check the pump for leaks and make sure that it is properly assembled.
How to Fix a Bike Pump Pressure Gauge
If your bike pump pressure gauge is not working, you can try to fix it yourself. Here are a few steps to follow:
1. Check the connection between the pressure gauge and the pump:
Make sure that the pressure gauge is securely attached to the pump and that the hose is not kinked or obstructed. If the connection is loose, tighten it or replace the hose.
2. Clean the pressure gauge:
Use a dry cloth to clean the pressure gauge. If the pressure gauge is dirty, it may not be able to read the pressure correctly.3. Inspect the pressure gauge for damage:
Look for cracks, tears, or other damage to the pressure gauge. If the pressure gauge is damaged, it will need to be replaced.
4. Check the pump:
Make sure that the pump is working properly. If the pump is not working properly, it may not be able to generate enough pressure to move the pressure gauge.
If you are unable to fix the bike pump pressure gauge yourself, you can take it to a bike shop for repairs.
How to Prevent Bike Pump Pressure Gauge Problems
You can prevent bike pump pressure gauge problems by following these tips:
Keep the pressure gauge clean:
Clean the pressure gauge with a dry cloth after each use.
Inspect the pressure gauge regularly for damage:
Look for cracks, tears, or other damage to the pressure gauge. If you see any damage, replace the pressure gauge.
Use a quality pump:
Buy a quality bike pump from a reputable brand. A quality pump will be more likely to work properly and last longer.
Store the pump properly:
Store the pump in a cool, dry place. Do not store the pump in direct sunlight or near heat sources.
By following these tips, you can help prevent bike pump pressure gauge problems.
You May Like to Read: Bike Pump Presta Valve Not Working
