Your Bike Pump Gauge Is Broken? Here’s What to Do

There’s nothing more frustrating than getting on your bike to go for a ride, only to find that your bike pump gauge isn’t working. You can’t tell how much air is in your tires, so you don’t know if they’re properly inflated. This can be a major inconvenience, especially if you’re in a hurry.

In this guide, I’ll show you how to troubleshoot a bike pump gauge that’s not working. I’ll cover the most common causes of this problem, and I’ll give you step-by-step instructions on how to fix it. By the end of this guide, you’ll be able to get your bike pump gauge working again, so you can get back to enjoying your rides.

Most Common Reasons: Bike Pump Gauge Not Working

Most Common Reasons: Bike Pump Gauge Not Working

1. Defective Gauge

The most common reason for a bike pump gauge not working is that the gauge itself is defective. This can happen for a variety of reasons, such as:

The gauge was damaged during shipping or handling.
The gauge was exposed to extreme temperatures.
The gauge was not properly calibrated.

If you suspect that the gauge is defective, you can try replacing it with a new one. If the new gauge still does not work, then the problem is likely not with the gauge itself.

2. Kinked or Collapsed Hose

Another common reason for a bike pump gauge not working is a kinked or collapsed hose. This can prevent the air from flowing properly into the tire, which will cause the gauge to read incorrectly.

To check for a kinked or collapsed hose, inspect the hose from the pump to the tire valve. If you see any kinks or collapses, straighten them out and try pumping the tire again.

3. Leaking Tire Valve

A leaking tire valve can also cause the bike pump gauge to not work properly. This can happen if the valve stem is damaged or if the valve core is loose.

To check for a leaking tire valve, inspect the valve stem for any damage. If you see any damage, replace the valve stem. If the valve stem looks fine, try tightening the valve core with a valve core wrench.

4. Improper Tire Inflation Pressure

Finally, it is important to make sure that you are inflating the tire to the correct pressure. If the tire is overinflated or underinflated, the gauge will not read correctly.

To check the correct tire inflation pressure, consult your bike’s owner’s manual. You can also find the correct tire inflation pressure on the sidewall of the tire.

How to Troubleshoot: Bike Pump Gauge Not Working

Symptoms

The bike pump gauge does not move when you pump the bike tire.
The bike pump gauge reads incorrectly.
The bike pump gauge is stuck in place.

Causes

The bike pump gauge is not properly connected to the bike pump.
The bike pump gauge is damaged.
The bike pump gauge is not calibrated correctly.

Solutions

1. Check the connection between the bike pump gauge and the bike pump:
Make sure that the gauge is securely attached to the pump and that there are no kinks or obstructions in the hose.

2. Inspect the bike pump gauge for damage:
Look for cracks, tears, or other signs of damage. If the gauge is damaged, it will need to be replaced.3. Calibrate the bike pump gauge:
You can calibrate the gauge using a pressure tester or by following the instructions in the bike pump’s owner’s manual.

How to Fix: Bike Pump Gauge Not Working

1. Disconnect the bike pump gauge from the bike pump:

2. Inspect the bike pump gauge for damage:
Look for cracks, tears, or other signs of damage. If the gauge is damaged, it will need to be replaced.3. Clean the bike pump gauge:
Use a soft cloth to wipe down the gauge and remove any dirt or debris.

4. Calibrate the bike pump gauge:
You can calibrate the gauge using a pressure tester or by following the instructions in the bike pump’s owner’s manual.

5. Reconnect the bike pump gauge to the bike pump:

6. Test the bike pump gauge to make sure it is working properly:
Pump up the bike tire and check the gauge to make sure it is reading correctly.

If you have tried all of these steps and the bike pump gauge is still not working, you may need to take it to a bike shop for repairs.

You May Like to Read: Bike Pump Pressure Gauge Not Working

About The Author

I'm Ryan, an avid road biker who also enjoys track racing, time trials, as well as riding off-road on a mountain bike or gravel bike. I believe cycling is a good way to improve the quality of life. Regardless of your skill level or interests, we make it accessible and enjoyable.

Leave a Comment