Do you have a Rad Power Bike whose speedometer isn’t working You’re not alone. This is a common problem, and it can be frustrating and inconvenient. But don’t worry, there’s a fix! In this guide, I’ll walk you through the steps to troubleshoot and repair your Rad Power Bike speedometer. I’ll also provide some tips on how to prevent this issue from happening again in the future. So if you’re ready to get your speedometer up and running again, let’s get started!
Most Common Reasons: Rad Power Bike Speedometer Not Working
Most Common Reasons: Rad Power Bike Speedometer Not Working
1. Loose or damaged connection
The most common reason for a Rad Power Bike speedometer not working is a loose or damaged connection. This can happen if the cable connecting the speedometer to the bike’s computer is not properly plugged in, or if the cable is damaged. To check for a loose connection, disconnect the cable from the speedometer and computer and reconnect it. If the speedometer still does not work, the cable may be damaged and will need to be replaced.
2. Faulty speedometer
If the speedometer is not receiving power, it will not work. This can happen if the speedometer’s battery is dead, or if there is a problem with the speedometer’s wiring. To check if the speedometer is receiving power, turn on the bike’s power and check the speedometer’s display. If the display is blank, the speedometer is not receiving power and will need to be repaired or replaced.
3. Faulty computer
The speedometer is connected to the bike’s computer, and if the computer is not working, the speedometer will not work either. To check if the computer is working, turn on the bike’s power and check the computer’s display. If the display is blank, the computer is not working and will need to be repaired or replaced.
4. Software issue
The speedometer may not be working properly if there is a software issue with the bike’s computer. To check for a software issue, update the computer’s firmware. If the speedometer still does not work after updating the firmware, the computer may need to be repaired or replaced.
How to Troubleshoot: Rad Power Bike Speedometer Not Working
What to do if your Rad Power Bike speedometer is not working
If your Rad Power Bike speedometer is not working, there are a few things you can check to troubleshoot the issue.
1. Make sure the speedometer is turned on:
The speedometer is located on the handlebars, and it should be turned on by a small switch. If the switch is turned off, the speedometer will not work.
2. Check the battery:
The speedometer is powered by a battery, and if the battery is dead, the speedometer will not work. To check the battery, remove the back cover of the speedometer and look for a small battery. If the battery is dead, replace it with a new one.3. Check the wiring:
The speedometer is connected to the bike’s electrical system by a wire. If the wire is damaged, the speedometer will not work. To check the wiring, inspect the wire for any damage. If the wire is damaged, replace it with a new one.
4. Reset the speedometer:
If the speedometer is not working properly, you may need to reset it. To reset the speedometer, hold down the reset button for a few seconds.
If you have checked all of these things and the speedometer is still not working, you may need to take your bike to a qualified bike mechanic for further diagnosis and repair.
How to Fix: Rad Power Bike Speedometer Not Working
If you have determined that the speedometer is not working due to a dead battery, you can fix it by replacing the battery. To do this, follow these steps:
1. Remove the back cover of the speedometer.
2. Locate the battery.
3. Remove the old battery and replace it with a new one.
4. Replace the back cover of the speedometer.
Once you have replaced the battery, the speedometer should be working again.
If you have determined that the speedometer is not working due to a damaged wire, you can fix it by replacing the wire. To do this, follow these steps:
1. Disconnect the old wire from the speedometer.
2. Connect the new wire to the speedometer.
3. Reconnect the old wire to the bike’s electrical system.
Once you have replaced the wire, the speedometer should be working again.
If you have determined that the speedometer is not working due to a problem with the speedometer itself, you may need to take your bike to a qualified bike mechanic for further diagnosis and repair.
You May Like to Read: Razor Dirt Bike Not Working
