Do you have a Rad Power Bike whose pedal assist isn’t working
If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself.
In this guide, I’ll walk you through the steps to troubleshoot and repair a Rad Power Bike whose pedal assist isn’t working. I’ll cover everything from common causes of the problem to specific troubleshooting steps. By the end of this guide, you’ll be able to get your bike back up and running in no time.
So if you’re ready to fix your Rad Power Bike, let’s get started!
Why Rad Power Bike Pedal Assist Not Working
Incorrectly Installed or Damaged Pedal Assist Sensor
The pedal assist sensor is a key component of the Rad Power Bike’s electric assist system. It’s responsible for detecting when you’re pedaling and sending a signal to the motor to provide power. If the sensor is installed incorrectly or damaged, it can cause the pedal assist to stop working.
Faulty Motor Controller
The motor controller is another key component of the Rad Power Bike’s electric assist system. It’s responsible for sending power from the battery to the motor. If the motor controller is faulty, it can cause the pedal assist to stop working.
Low Battery
If the battery is low, it may not have enough power to provide the motor with the necessary voltage to function properly. This can cause the pedal assist to stop working.
Software Glitch
The Rad Power Bike’s electronic system is controlled by software. In rare cases, a software glitch can cause the pedal assist to stop working.
Physical Damage
The Rad Power Bike’s pedal assist system can be damaged if it’s subjected to a lot of stress or impact. This can cause the system to malfunction and stop working properly.
How to Troubleshoot: Rad Power Bike Pedal Assist Not Working
What to Do If Your Rad Power Bike Pedal Assist Is Not Working
If your Rad Power Bike pedal assist is not working, there are a few things you can check to troubleshoot the problem.
1. Check the battery level:
Make sure that your battery is charged and that the battery indicator is showing a green light. If the battery is not charged, plug it in and charge it for at least 4 hours.
2. Check the pedal assist setting:
Make sure that the pedal assist setting is turned on. You can do this by pressing the power button on the bike and then using the up and down arrows to select the desired setting.3. Check the wiring:
Make sure that the wiring between the battery and the motor is connected properly. You can do this by inspecting the wiring harness for any damage or loose connections. If you find any damage or loose connections, repair or replace the wiring as needed.
4. Check the motor:
If the pedal assist is still not working after checking the battery, pedal assist setting, and wiring, then the problem may be with the motor itself. You can try to troubleshoot the motor by following the steps below:
Turn off the bike and disconnect the battery.
Remove the motor cover.
Inspect the motor for any damage or wear.
Check the motor connections for any damage or loose connections.
If you find any damage or loose connections, repair or replace them as needed.
Reassemble the motor and reconnect the battery.
If you have checked all of the above and the pedal assist is still not working, then you may need to contact Rad Power Bikes for further assistance.
How to Fix: Rad Power Bike Pedal Assist Not Working
If you have determined that the problem with your Rad Power Bike pedal assist is with the motor, you can try to fix it by following the steps below:
1. Turn off the bike and disconnect the battery:
2. Remove the motor cover.
3. Inspect the motor for any damage or wear.
4. If you see any damage, you can try to repair it yourself or you can take the motor to a bike shop for repairs.
5. Once the motor is repaired, reassemble the motor and reconnect the battery.
6. Turn on the bike and test the pedal assist to make sure that it is working properly.
If you are unable to fix the motor yourself, you can take the bike to a Rad Power Bikes dealer for repairs.
Conclusion
If your Rad Power Bike pedal assist is not working, there are a few things you can check to troubleshoot the problem. If you are unable to fix the problem yourself, you can take the bike to a Rad Power Bikes dealer for repairs.
FAQs: Rad Power Bike Pedal Assist Not Working
Why is my Rad Power Bike pedal assist not working?
There are a few reasons why your Rad Power Bike pedal assist might not be working. Here are some of the most common:
The battery is low: Make sure that your battery is fully charged before using your bike. You can check the battery level on the display screen.
The battery is not properly connected: Make sure that the battery is securely connected to the bike. You can check the connection by looking at the battery port on the bike and the battery itself.
The pedal assist sensor is dirty: The pedal assist sensor is located on the crank arm. If it is dirty, it can cause the pedal assist to not work properly. Clean the sensor with a dry cloth.
The pedal assist sensor is damaged: If the pedal assist sensor is damaged, it will need to be replaced. You can contact Rad Power Bikes for assistance with this.
The bike’s software is outdated: Rad Power Bikes regularly releases software updates for their bikes. Make sure that your bike’s software is up to date. You can check the software version on the display screen.
How do I turn on the pedal assist on my Rad Power Bike?
To turn on the pedal assist on your Rad Power Bike, follow these steps:
1. Press the power button on the display screen.
2. Use the up and down arrows on the display screen to select the pedal assist level.
3. Press the power button to confirm your selection.
The pedal assist level will be displayed on the display screen. You can change the pedal assist level at any time by following the same steps.
How do I adjust the pedal assist on my Rad Power Bike?
You can adjust the pedal assist on your Rad Power Bike by using the up and down arrows on the display screen. The pedal assist level will be displayed on the display screen. You can change the pedal assist level at any time while you are riding your bike.
What is the difference between the different pedal assist levels?
The different pedal assist levels on a Rad Power Bike provide different levels of assistance to the rider. The higher the pedal assist level, the more assistance the bike will provide.
The following table shows the different pedal assist levels and the amount of assistance they provide:
| Pedal Assist Level | Assistance (%) |
|—|—|
| 1 | 10 |
| 2 | 25 |
| 3 | 50 |
| 4 | 75 |
| 5 | 100 |
What should I do if my Rad Power Bike pedal assist is still not working?
If your Rad Power Bike pedal assist is still not working after you have tried the steps above, you can contact Rad Power Bikes for assistance. You can contact them by email or by phone.
Must Read THIS: Razor Electric Dirt Bike Not Working