If the Expresso bike screen is not working, you can try the following 1. Power cycle the bike by pressing and holding the power button for 5 seconds. 2. Check the connection between the screen and the bike. Make sure the cable is securely plugged in. 3. Reset the screen by pressing and holding the reset button for 5 seconds.
Exerpeutic bike tension control not working If the tension control on your Exerpeutic bike is not working, you may need to adjust the cable. To do this, follow these steps
1. Turn off the bike and unplug it from the outlet.
2. Locate the tension cable on the underside of the bike.
3. Use a screwdriver to loosen the cable clamp.
4. Pull the cable out of the clamp and adjust it to the desired tension.
5. Retighten the cable clamp.
6. Plug the bike back into the outlet and turn it on.
If your Exerpeutic bike display is not working, you can try resetting it by unplugging the bike for 30 seconds, then plugging it back in. If that doesn’t work, you may need to contact customer support for further assistance.
If the tension control on your exercise bike is not working, you may need to adjust the cable or replace the tension spring. Consult your owner’s manual for specific instructions.
Exercise bike speedometer not working
The exercise bike speedometer is not working. The display is blank, and the bike is not tracking distance or speed. You have tried resetting the speedometer, but it has not fixed the problem. You can try contacting the manufacturer for a replacement speedometer.
If your exercise bike sensor is not working, you may need to replace it. To do this, follow these steps 1. Remove the old sensor from the bike. 2. Align the new sensor with the hole in the bike frame. 3. Insert the new sensor into the hole and tighten the screws. 4. Turn on the bike and test the sensor to make sure it is working properly.
The exercise bike screen is not working. It is displaying an error code. The error code is ERR 01.
If the pulse sensor on your exercise bike is not working, there are a few things you can check. First, make sure that the sensor is properly connected to the bike. Second, try cleaning the sensor with a dry cloth. Third, try replacing the batteries in the sensor. If none of these solutions work, you may need to contact the manufacturer of the bike for assistance.
If your exercise bike console is not working, you may need to reset it. To do this, turn off the bike and unplug it from the outlet. Wait for 5 seconds, then plug the bike back in and turn it on. The console should now be working properly.
If your exercise bike display is not working, try the following Check the power supply to make sure it is plugged in and turned on.
Make sure the display is properly connected to the bike.
Reset the display by pressing and holding the power button for 10 seconds.
If the display is still not working, contact the manufacturer for assistance.