Exerpeutic Bike Tension Control Not Working [Reasons & Fixes]

Do you have an Exerpoetic bike with a tension control that isn’t working properly

You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, I’m here to help. In this guide, I’ll walk you through the steps to troubleshoot and fix the tension control on your Exerpoetic bike.

I’ll start by explaining how the tension control works and what could be causing it to malfunction. Then, I’ll give you step-by-step instructions on how to diagnose and repair the problem.

By the end of this guide, you’ll be able to get your Exerpoetic bike back in working order in no time. So let’s get started!

Why Exerpeutic Bike Tension Control Not Working

Tension Control Cable Malfunction

The tension control cable may be frayed, kinked, or broken.
The tension control cable may be incorrectly routed.
The tension control cable may be binding in the cable housing.

Tension Control Hub Malfunction

The tension control hub may be damaged.
The tension control hub may be incorrectly adjusted.

Tension Control Drum Malfunction

The tension control drum may be damaged.
The tension control drum may be incorrectly adjusted.

Tension Control Pulley Malfunction

The tension control pulley may be damaged.
The tension control pulley may be incorrectly adjusted.

How to Troubleshoot: Exerpeutic Bike Tension Control Not Working

Symptoms

The tension control knob does not turn smoothly.
The tension control knob does not engage the tensioner.
The tensioner does not move when the tension control knob is turned.
The belt is loose or slipping.

Causes

The tension control knob is dirty or damaged.
The tension control cable is frayed or damaged.
The tensioner is dirty or damaged.
The belt is worn out or damaged.

Solutions

1. Clean the tension control knob:
Use a dry cloth to wipe off any dirt or debris from the tension control knob.

2. Lubricate the tension control knob:
Apply a small amount of light oil to the tension control knob to help it turn more smoothly.3. Replace the tension control cable:
If the tension control cable is frayed or damaged, it will need to be replaced.

4. Clean the tensioner:
Use a dry cloth to wipe off any dirt or debris from the tensioner.

5. Lubricate the tensioner:
Apply a small amount of light oil to the tensioner to help it move more smoothly.

6. Replace the belt:
If the belt is worn out or damaged, it will need to be replaced.

How to Fix: Exerpeutic Bike Tension Control Not Working

1. Turn off the bike and unplug it from the power outlet:

2. Remove the seat and the shroud cover.
3. Locate the tension control knob.
4. Clean the tension control knob with a dry cloth.
5. Lubricate the tension control knob with a small amount of light oil.
6. Reconnect the seat and the shroud cover.
7. Turn on the bike and plug it into the power outlet.
8. Turn the tension control knob to adjust the tension of the belt.

Troubleshooting Tips

If the tension control knob is still not working after you have cleaned and lubricated it, you may need to replace the tension control cable.
If the tensioner is still not moving after you have cleaned and lubricated it, you may need to replace the tensioner.
If the belt is still loose or slipping after you have replaced it, you may need to adjust the tension of the belt.

Additional Resources

[Exerpeutic Bike Tension Control Not Working](https://www.exerpeutic.com/blog/exerpeutic-bike-tension-control-not-working/)
[How to Fix a Loose Belt on an Exercise Bike](https://www.wikihow.com/Fix-a-Loose-Belt-on-an-Exercise-Bike)
[How to Adjust the Tension on an Exercise Bike Belt](https://www.livestrong.com/article/453917-how-to-adjust-the-tension-on-an-exercise-bike-belt/)

FAQs: Exerpeutic Bike Tension Control Not Working

Why is my Exerpeutic bike tension control not working?

There are a few possible reasons why your Exerpeutic bike tension control may not be working. Here are some of the most common causes:

The tension knob is not turned all the way up: Make sure that the tension knob is turned all the way clockwise until it clicks into place.

The tension cable is loose or broken: Check the tension cable to make sure that it is properly connected to the tension knob and the flywheel. If the cable is loose, tighten it or replace it. If the cable is broken, you will need to replace it.

The flywheel is dirty or damaged: If the flywheel is dirty, it can cause the tension control to malfunction. Clean the flywheel with a dry cloth or a mild detergent. If the flywheel is damaged, you will need to replace it.

The tension control is defective: If the tension control is defective, you will need to replace it.

How do I adjust the tension on my Exerpeutic bike?

To adjust the tension on your Exerpeutic bike, follow these steps:

1. Turn the tension knob clockwise to increase the tension.
2. Turn the tension knob counterclockwise to decrease the tension.

The tension knob is located on the front of the bike, near the flywheel. You can adjust the tension while you are riding the bike, or you can adjust it before you start riding.

What is the best tension for my Exerpeutic bike?

The best tension for your Exerpeutic bike depends on your fitness level and the type of workout you are doing. If you are new to exercise, start with a low tension and gradually increase the tension as you get stronger. If you are doing a cardio workout, you will want to use a higher tension than if you are doing a strength training workout.

What happens if I use too much tension on my Exerpeutic bike?

Using too much tension on your Exerpeutic bike can cause you to strain your muscles and joints. It can also make it difficult to pedal and can lead to a decrease in your workout performance. If you are experiencing pain or discomfort while using your bike, you should decrease the tension.

What happens if I use too little tension on my Exerpeutic bike?

Using too little tension on your Exerpeutic bike can make it difficult to get a good workout. You may not be able to build muscle or burn fat as effectively. If you are not feeling challenged by your workout, you should increase the tension.

Must Read THIS: Expresso Bike Screen Not Working

About The Author

I'm Ryan, an avid road biker who also enjoys track racing, time trials, as well as riding off-road on a mountain bike or gravel bike. I believe cycling is a good way to improve the quality of life. Regardless of your skill level or interests, we make it accessible and enjoyable.

Leave a Comment