Do you have a NordicTrack S22i bike that’s not providing the resistance you need
If so, you’re not alone.
This is a common problem, and there are a few simple things you can check to fix it.
In this guide, I’ll walk you through the steps to troubleshoot the resistance problem on your NordicTrack S22i bike.
I’ll also provide some tips on how to prevent this issue from happening in the future.
So if you’re ready to get your bike back up and running, let’s get started!
Why Nordictrack Bike S22I Resistance Not Working
1. Faulty Resistance Control Board
The resistance control board is responsible for sending signals to the motor to adjust the resistance level. If the resistance control board is faulty, it will not be able to send the correct signals to the motor, and the resistance will not work properly.
2. Faulty Motor
The motor is responsible for providing the resistance to the bike. If the motor is faulty, it will not be able to provide the correct amount of resistance, and the resistance will not work properly.
3. Loose or Damaged Resistance Wires
The resistance wires connect the resistance control board to the motor. If the resistance wires are loose or damaged, they will not be able to transmit the signals from the resistance control board to the motor, and the resistance will not work properly.
4. Clogged Resistance Brake
The resistance brake is located on the flywheel of the bike. It is responsible for creating friction and providing resistance to the bike. If the resistance brake is clogged with dirt or debris, it will not be able to create enough friction, and the resistance will not work properly.
How to Troubleshoot: nordictrack bike s22i resistance not working
Symptoms
The resistance level does not change when you adjust the knob.
The resistance level changes on its own.
The resistance level is not as high as you would like it to be.
The resistance level is not as low as you would like it to be.
Possible Causes
The resistance knob is not properly adjusted.
The resistance cable is damaged or disconnected.
The resistance motor is faulty.
How to Troubleshoot
1. Check the resistance knob:
Make sure that the knob is turned all the way to the right to increase resistance and all the way to the left to decrease resistance. If the knob is not properly adjusted, it may not be able to change the resistance level.
2. Inspect the resistance cable:
Look for any damage to the cable, such as fraying or kinks. If the cable is damaged, it will need to be replaced.3. Test the resistance motor:
Use a multimeter to check the resistance motor for continuity. If the motor does not have continuity, it will need to be replaced.
How to Fix: nordictrack bike s22i resistance not working
1. To adjust the resistance knob, turn it clockwise to increase resistance and counterclockwise to decrease resistance.
2. To repair a damaged resistance cable, you will need to remove the old cable and install a new one. Follow the instructions in your owner’s manual for more information.3. To replace a faulty resistance motor, you will need to remove the old motor and install a new one. Follow the instructions in your owner’s manual for more information.
FAQs: NordicTrack Bike S22i Resistance Not Working
Why is the resistance not working on my NordicTrack Bike S22i?
There are a few possible reasons why the resistance may not be working on your NordicTrack Bike S22i.
The resistance knob may be turned to the wrong setting: Make sure that the resistance knob is turned all the way up to the highest setting.
The resistance unit may be turned off: Check to make sure that the resistance unit is turned on.
The resistance unit may be damaged: If the resistance unit is damaged, it will need to be replaced.
The resistance cable may be disconnected: Check to make sure that the resistance cable is properly connected to the resistance unit.
The resistance cable may be damaged: If the resistance cable is damaged, it will need to be replaced.
How do I increase the resistance on my NordicTrack Bike S22i?
To increase the resistance on your NordicTrack Bike S22i, turn the resistance knob clockwise. You can also increase the resistance by using the resistance unit on the console.
How do I decrease the resistance on my NordicTrack Bike S22i?
To decrease the resistance on your NordicTrack Bike S22i, turn the resistance knob counterclockwise. You can also decrease the resistance by using the resistance unit on the console.
How do I reset the resistance on my NordicTrack Bike S22i?
To reset the resistance on your NordicTrack Bike S22i, follow these steps:
1. Turn off the bike.
2. Press and hold the Mode button for 5 seconds.
3. The resistance will be reset to the default setting.
What should I do if the resistance is still not working on my NordicTrack Bike S22i?
If the resistance is still not working on your NordicTrack Bike S22i, you should contact NordicTrack customer support for assistance.
Must Read THIS: Nordictrack Bike S22I Screen Not Working