: A Troubleshooting Guide
As a bicycle owner, there’s nothing more frustrating than when your front brake isn’t working properly. Not only is it a safety hazard, but it can also make riding your bike difficult and uncomfortable. If you’re experiencing this issue, don’t despair. In this guide, I’ll walk you through the steps to troubleshoot and repair your front brake. So, whether you’re a seasoned cyclist or a complete beginner, read on for all the information you need to get your bike back in working order.
Most Common Reasons: Guardian Bike Front Brake Not Working
Most Common Reasons: Guardian Bike Front Brake Not Working
Brake Pads Worn Out
The most common reason for a front brake not working is that the brake pads are worn out. When the brake pads are worn out, they no longer make contact with the brake rotor and cannot slow the wheel down.
To check if the brake pads are worn out, you can look at them and see if they are thin or if there is a lot of material missing. You can also try to brake and see if the brakes feel spongy or if they don’t slow the bike down as much as they used to.
If the brake pads are worn out, you will need to replace them.
Brake Rotor Damaged
Another common reason for a front brake not working is that the brake rotor is damaged. When the brake rotor is damaged, it cannot make contact with the brake pads and cannot slow the wheel down.
To check if the brake rotor is damaged, you can look at it and see if there are any cracks or gouges in it. You can also try to brake and see if the brakes feel spongy or if they don’t slow the bike down as much as they used to.
If the brake rotor is damaged, you will need to have it replaced.
Brake Caliper Not Adjusted Properly
The brake caliper is the part of the brake that holds the brake pads against the brake rotor. If the brake caliper is not adjusted properly, it can cause the brake pads to not make contact with the brake rotor and the brakes will not work properly.
To check if the brake caliper is adjusted properly, you can look at it and see if the brake pads are evenly spaced from the brake rotor. You can also try to brake and see if the brakes feel spongy or if they don’t slow the bike down as much as they used to.
If the brake caliper is not adjusted properly, you will need to adjust it.
Brake Fluid Low
The brake fluid is the hydraulic fluid that transfers the force from the brake lever to the brake caliper. If the brake fluid is low, it can cause the brakes to not work properly.
To check if the brake fluid is low, you can look at the brake reservoir. The brake reservoir is the small reservoir on the brake caliper that holds the brake fluid. If the brake fluid level is below the minimum level, you will need to add more brake fluid.
If the brake fluid is low, you will need to add more brake fluid.
How to Troubleshoot: guardian bike front brake not working
Symptoms
There are a few different symptoms that can indicate that your Guardian bike front brake is not working properly. These include:
The brake lever feels spongy or doesn’t return to its original position after being applied.
The brake pads are not making contact with the rim.
The brake is making a squealing or grinding noise when applied.
The bike pulls to one side when braking.
Causes
There are a number of different things that could cause your Guardian bike front brake not to work properly. These include:
Dirty or worn brake pads:
If the brake pads are dirty or worn, they may not be able to make proper contact with the rim, which will reduce braking power.
Incorrectly adjusted brake cables:
If the brake cables are too tight or too loose, they may not be able to apply the brakes properly.
A damaged brake rotor:
If the brake rotor is warped or damaged, it may not be able to provide consistent braking power.
A faulty brake caliper:
If the brake caliper is damaged or malfunctioning, it may not be able to apply the brakes properly.
How to Fix It
Once you have identified the cause of the problem, you can begin to fix it. Here are a few tips:
Clean or replace the brake pads:
If the brake pads are dirty, you can clean them with a degreaser and a rag. If the brake pads are worn, you will need to replace them.
Adjust the brake cables:
If the brake cables are too tight or too loose, you can adjust them using the barrel adjuster on the brake lever.
Replace the brake rotor:
If the brake rotor is warped or damaged, you will need to replace it.
Repair or replace the brake caliper:
If the brake caliper is damaged or malfunctioning, you will need to repair or replace it.
Prevention
You can help prevent problems with your Guardian bike front brake by following these tips:
Inspect your brakes regularly:
Check the brake pads for wear and tear, and make sure that the brake cables are properly adjusted.
Clean your brakes regularly:
A dirty brake can cause the brake pads to not make proper contact with the rim, which can lead to reduced braking power.
Don’t overload your bike:
Overloading your bike can put extra stress on the brakes, which can lead to premature wear and tear.
Use your brakes properly:
Don’t overuse your brakes, and avoid braking hard when you don’t need to.
By following these tips, you can help keep your Guardian bike front brake in good working order and prevent problems from occurring.
You May Like to Read: Hydraulic Brakes Bike Not Working
