Your Electric Bike Speedometer Isn’t Working? Here’s Why

As an avid cyclist and certified bicycle mechanic, I know how frustrating it can be when your electric bike speedometer stops working. Not only is it inconvenient, but it can also be dangerous if you’re not aware of how fast you’re going.

In this guide, I’ll walk you through the steps to troubleshoot a non-working electric bike speedometer. I’ll cover everything from common causes of the problem to specific troubleshooting tips for each type of electric bike speedometer.

By the end of this guide, you’ll be able to get your electric bike speedometer up and running again in no time!

Most Common Reasons: Electric Bike Speedometer Not Working

Most Common Reasons: Electric Bike Speedometer Not Working

1. Loose or damaged wiring

The most common reason for an electric bike speedometer not working is loose or damaged wiring. This can occur if the wires are pinched or crushed, or if they become frayed or disconnected. To check for this, inspect the wiring carefully for any damage. If you find any damage, you will need to repair or replace the wires.

2. Faulty speedometer sensor

Another common cause of a speedometer not working is a faulty speedometer sensor. This sensor is typically located on the front wheel hub and sends a signal to the speedometer when the wheel rotates. If the sensor is damaged or malfunctioning, it will not be able to send a signal to the speedometer, and the speedometer will not work. To check for this, you will need to test the speedometer sensor.

3. Faulty speedometer display

In some cases, the speedometer itself may be faulty. This can happen if the display is damaged, or if the internal components are malfunctioning. To check for this, you will need to test the speedometer display.

4. Software issue

In some cases, a speedometer may not work due to a software issue. This can happen if the software is corrupted, or if there is a conflict with another software program. To check for this, you will need to update the software or reinstall the software.

5. Other causes

There are a number of other potential causes of an electric bike speedometer not working. These include:

A problem with the battery
A problem with the controller
A problem with the motor
A problem with the brakes
A problem with the wheels

If you have checked all of the above potential causes and the speedometer is still not working, you will need to take your bike to a qualified bicycle mechanic for further diagnosis and repair.

How to Troubleshoot: Electric Bike Speedometer Not Working

Symptoms

There are a few different symptoms that can indicate that your electric bike speedometer is not working properly. These include:

The speedometer is not displaying any speed, or it is displaying an incorrect speed.
The speedometer is not responding to changes in speed.
The speedometer is turning on and off randomly.
The speedometer is making a strange noise.

Causes

There are a number of different things that can cause an electric bike speedometer to stop working. These include:

A loose or damaged wire:
The speedometer is connected to the bike’s electrical system by a wire. If this wire is loose or damaged, it can prevent the speedometer from receiving the correct signals and displaying the correct speed.

A faulty speedometer sensor:
The speedometer sensor is responsible for sending signals to the speedometer. If this sensor is faulty, it can cause the speedometer to display incorrect speeds or not work at all.

A faulty speedometer controller:
The speedometer controller is the part of the bike’s electrical system that interprets the signals from the speedometer sensor and displays the speed on the speedometer. If this controller is faulty, it can cause the speedometer to malfunction.

Troubleshooting

If you are experiencing problems with your electric bike speedometer, there are a few things you can do to troubleshoot the issue.

Check the wire connection:
First, check to make sure that the wire connecting the speedometer to the bike’s electrical system is securely connected. If the wire is loose, reconnect it and see if the speedometer starts working.

Inspect the speedometer sensor:
Next, inspect the speedometer sensor for damage. If the sensor is damaged, it will need to be replaced.

Test the speedometer controller:
Finally, you can test the speedometer controller to see if it is working properly. You can do this by using a multimeter to check the voltage at the controller’s terminals. If the voltage is not correct, the controller will need to be replaced.

How to Fix an Electric Bike Speedometer

If you have determined that the problem with your electric bike speedometer is a loose or damaged wire, you can fix it by following these steps:

1. Turn off the bike’s power:

2. Locate the wire connection between the speedometer and the bike’s electrical system.
3. Disconnect the wire from the speedometer.
4. Use a multimeter to check the voltage at the wire’s terminals.
5. If the voltage is not correct, reconnect the wire and tighten the connection.
6. Turn on the bike’s power and test the speedometer to make sure it is working properly.

If you have determined that the problem with your electric bike speedometer is a faulty speedometer sensor, you can fix it by following these steps:

1. Turn off the bike’s power:

2. Remove the speedometer from the bike.
3. Disconnect the wire from the speedometer sensor.
4. Inspect the speedometer sensor for damage.
5. If the sensor is damaged, replace it with a new one.
6. Reconnect the wire to the speedometer sensor.
7. Reattach the speedometer to the bike.
8. Turn on the bike’s power and test the speedometer to make sure it is working properly.

If you have determined that the problem with your electric bike speedometer is a faulty speedometer controller, you can fix it by following these steps:

1. Turn off the bike’s power:

2. Remove the speedometer from the bike.
3. Disconnect the wire from the speedometer controller.
4. Inspect the speedometer controller for damage.
5. If the controller is damaged, replace it with a new one.
6. Reconnect the wire to the speedometer controller.
7. Reattach the speedometer to the bike.
8. Turn on the bike’s power and test the speedometer to make sure it is working properly.

You May Like to Read: Gta Online Custom Bike Shop Not Working

About The Author

I'm Ryan, an avid road biker who also enjoys track racing, time trials, as well as riding off-road on a mountain bike or gravel bike. I believe cycling is a good way to improve the quality of life. Regardless of your skill level or interests, we make it accessible and enjoyable.

Leave a Comment