Electric Bike Brakes Not Working? Here’s Why!

You’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, it’s usually easy to fix. In this guide, I’ll walk you through the steps to troubleshoot and repair your electric bike brakes. I’ll also provide tips on how to prevent this issue from happening again. So if your electric bike brakes aren’t working, read on for help!

Most Common Reasons: Electric Bike Brakes Not Working

Most Common Reasons: Electric Bike Brakes Not Working

1. Mechanical failure

Brake pads worn out or damaged
Brake rotors warped or damaged
Brake cables stretched or frayed
Brake levers sticking or not working properly

2. Hydraulic failure

Brake fluid leaking or low
Brake pistons sticking or not working properly
Master cylinder damaged

3. Electrical failure

Brake controller malfunction
Brake sensor malfunction
Brake cable disconnected or damaged
Battery low or dead

How to Troubleshoot: Electric Bike Brakes Not Working

Symptoms of Electric Bike Brakes Not Working

There are a few different symptoms that can indicate that your electric bike brakes are not working properly. These include:

The brakes feel spongy or unresponsive:
This is usually caused by a buildup of brake fluid or dirt and grime in the brake system.

The brakes make a squealing or grinding noise when you apply them:
This is usually caused by worn brake pads or rotors.

The brakes don’t stop the bike as quickly as they used to:
This is usually caused by worn brake pads or rotors, or by a problem with the brake calipers or master cylinder.

How to Troubleshoot Electric Bike Brakes

If you’re experiencing any of the symptoms listed above, it’s important to troubleshoot the problem as soon as possible to avoid a serious accident. Here are a few steps you can take to troubleshoot your electric bike brakes:

1. Inspect the brake pads and rotors:
Look for signs of wear, such as cracks, grooves, or damage. If the brake pads are worn down to the metal, or if the rotors are scored or warped, they will need to be replaced.

2. Check the brake fluid level:
The brake fluid reservoir should be at least half full. If the fluid level is low, you will need to add more brake fluid.3. Inspect the brake calipers and master cylinder:
Look for signs of leaks, such as fluid on the ground or around the calipers. If you see any leaks, you will need to have the brakes repaired or replaced.

4. Test the brakes:
After you have inspected the brakes, take your bike for a test ride and see how they perform. If the brakes still don’t work properly, you will need to have them repaired or replaced by a qualified bike mechanic.

How to Fix Electric Bike Brakes Not Working

If you’ve determined that your electric bike brakes need to be repaired or replaced, you can either do the work yourself or take your bike to a qualified bike mechanic. Here are a few tips for fixing electric bike brakes:

If you’re replacing the brake pads, make sure to use the correct type of brake pads for your bike:
You can find the correct brake pads for your bike by checking the owner’s manual or by contacting the manufacturer.

When bleeding the brakes, be sure to follow the manufacturer’s instructions carefully:
Bleeding the brakes incorrectly can damage the brake system.

If you’re not comfortable working on your bike’s brakes, take it to a qualified bike mechanic:
A qualified bike mechanic will be able to diagnose and repair the problem quickly and efficiently.

Preventing Electric Bike Brake Problems

The best way to prevent electric bike brake problems is to take care of your brakes and to inspect them regularly. Here are a few tips for preventing electric bike brake problems:

Inspect your brakes regularly:
Check the brake pads and rotors for signs of wear, and make sure the brake fluid level is at least half full.

Wear proper cycling shoes:
Cycling shoes with stiff soles provide better traction and help you to apply the brakes more effectively.

Be careful when riding in wet weather:
Wet weather can make it more difficult to stop your bike, so be sure to slow down and use your brakes early.

Don’t overload your bike:
Overloading your bike can put extra stress on the brakes and shorten their lifespan.

By following these tips, you can help to keep your electric bike brakes working properly and avoid a serious accident.

You May Like to Read: Electric Bike Pedal Assist Not Working

About The Author

I'm Ryan, an avid road biker who also enjoys track racing, time trials, as well as riding off-road on a mountain bike or gravel bike. I believe cycling is a good way to improve the quality of life. Regardless of your skill level or interests, we make it accessible and enjoyable.

Leave a Comment