Do you have a dirt bike with a rear brake that isn’t working You’re not alone. This is a common problem, and it can be frustrating and even dangerous. But don’t worry, I’m here to help. In this guide, I’ll walk you through the steps to troubleshoot and repair your rear brake. I’ll also provide some tips on how to prevent this problem from happening again. So whether you’re a seasoned rider or a newbie, read on for all the information you need to know about fixing a rear brake that isn’t working.
Most Common Reasons: Dirt Bike Rear Brake Not Working
Most Common Reasons: Dirt Bike Rear Brake Not Working
1. Insufficient Brake Pad Material
The brake pads are the part of the brake that actually makes contact with the rotor and slows the bike down. If the brake pads are worn down too much, they won’t be able to create enough friction to stop the bike.
To check the brake pad thickness, use a brake pad gauge. If the brake pads are less than 1mm thick, they need to be replaced.
2. Brake Fluid Leak
The brake fluid is what transfers the force from the brake lever to the brake pads. If there is a leak in the brake fluid system, the brakes won’t be able to work properly.
To check for a brake fluid leak, look for any signs of fluid on the ground or on the bike. You can also check the brake fluid reservoir to see if the level is low.
3. Clogged Brake Lines
The brake lines are the hoses that carry the brake fluid from the master cylinder to the calipers. If the brake lines are clogged, the fluid won’t be able to flow properly and the brakes won’t work as well.
To check for clogged brake lines, use a pressure tester to check the brake fluid pressure. If the pressure is low, it could be caused by a clogged brake line.
4. Faulty Brake Calipers
The brake calipers are the part of the brake that applies the force to the brake pads. If the brake calipers are faulty, they won’t be able to apply enough force to the brake pads and the brakes won’t work properly.
To check the brake calipers, look for any signs of damage or wear. You can also try to move the calipers by hand to see if they are binding.
5. Faulty Brake Master Cylinder
The brake master cylinder is the part of the brake that generates the force that is transferred to the brake calipers. If the brake master cylinder is faulty, the brakes won’t work properly.
To check the brake master cylinder, look for any signs of damage or wear. You can also try to pump the brake lever to see if the brakes feel spongy or if they don’t build up enough pressure.
How to Troubleshoot: Dirt Bike Rear Brake Not Working
Symptoms
There are a few different symptoms that may indicate that your dirt bike rear brake is not working properly. These include:
The brake pedal feels spongy or doesn’t return to its original position after being pressed.
The brake lever feels spongy or doesn’t return to its original position after being squeezed.
The brake pads are not making contact with the brake rotor.
The brake fluid reservoir is low or empty.
The brake lines are damaged or leaking.
The brake caliper is seized or sticking.
Troubleshooting
Once you have identified the symptoms of your dirt bike rear brake problem, you can begin to troubleshoot the issue. Here are a few things to check:
Check the brake fluid level:
If the brake fluid reservoir is low or empty, you will need to add more brake fluid. Be sure to use the same type of brake fluid that is specified in your dirt bike’s owner’s manual.
Check the brake lines:
Look for any damage or leaks in the brake lines. If you find any damage, you will need to replace the damaged brake lines.
Check the brake caliper:
Make sure that the brake caliper is properly installed and that the brake pads are not sticking. If the brake caliper is seized or sticking, you will need to have it repaired or replaced.
Check the brake pads:
Make sure that the brake pads are not worn out. If the brake pads are worn out, you will need to replace them.
How to Fix: Dirt Bike Rear Brake Not Working
Once you have identified and troubleshooted the problem with your dirt bike rear brake, you can begin to fix the issue. Here are a few things you can do:
Add brake fluid:
If the brake fluid reservoir is low or empty, you will need to add more brake fluid. Be sure to use the same type of brake fluid that is specified in your dirt bike’s owner’s manual.
Replace the brake lines:
If you find any damage or leaks in the brake lines, you will need to replace the damaged brake lines.
Repair or replace the brake caliper:
If the brake caliper is seized or sticking, you will need to have it repaired or replaced.
Replace the brake pads:
If the brake pads are worn out, you will need to replace them.
Prevention
The best way to prevent problems with your dirt bike rear brake is to maintain it properly. Here are a few things you can do to prevent problems:
Check the brake fluid level regularly and add more brake fluid as needed:
Inspect the brake lines regularly for damage or leaks:
Inspect the brake caliper regularly for signs of wear or damage:
Inspect the brake pads regularly for wear and replace them as needed:
By following these tips, you can help to keep your dirt bike rear brake working properly and ensure that you have safe and reliable braking performance.
You May Like to Read: Disc Brakes Bike Not Working
