Do you ever get frustrated when your bike brake light isn’t working
You’re not alone. This is a common problem that can be both annoying and dangerous. But don’t worry, I’m here to help. In this troubleshooting guide, I’ll walk you through the steps to diagnose and fix the issue. So whether your brake light is flickering, not turning on at all, or only working intermittently, I’ll have you back on the road in no time.
Most Common Reasons: Bike Brake Light Not Working
Most Common Reasons: Bike Brake Light Not Working
1. Faulty Brake Light Switch
The brake light switch is a small electrical switch that is located on the brake lever. When you apply the brakes, the switch is activated and sends a signal to the brake light. If the switch is faulty, it may not be able to send a signal to the light, causing it to not work.
2. Broken Brake Light Bulb
The brake light bulb is a small light bulb that is located in the rear of the bike. If the bulb is broken, it will not be able to produce light, causing the brake light to not work.
3. Loose or Damaged Wires
The brake light wires are responsible for sending the signal from the brake light switch to the brake light bulb. If the wires are loose or damaged, they may not be able to properly transmit the signal, causing the brake light to not work.
4. Faulty Brake Light Harness
The brake light harness is a group of wires that connect the brake light switch to the brake light bulb. If the harness is faulty, it may not be able to properly transmit the signal from the switch to the bulb, causing the brake light to not work.
5. Disconnected Brake Light
The brake light may be disconnected from the bike’s electrical system. This can happen if the bike is involved in an accident or if the light is accidentally disconnected. If the brake light is disconnected, it will not be able to receive power and will not work.
Bike Brake Light Not Working
Troubleshooting
If your bike brake light is not working, there are a few things you can check to troubleshoot the problem.
Check the light bulb:
The most common cause of a bike brake light not working is a burnt-out light bulb. To check the light bulb, remove the lens cover and look at the bulb. If the bulb is blackened or cracked, it needs to be replaced.
Check the fuse:
Another common cause of a bike brake light not working is a blown fuse. To check the fuse, locate the fuse box on your bike. The fuse box is usually located under the seat or on the handlebars. Remove the fuse and check it for a break in the filament. If the fuse is blown, replace it with a new one.
Check the wiring:
If the light bulb and fuse are both good, the problem may be with the wiring. To check the wiring, disconnect the wires from the light bulb and check for any damage. If the wires are damaged, they need to be repaired or replaced.
Check the brake switch:
The brake switch is a small switch that is activated when you apply the brakes. If the brake switch is not working properly, it can prevent the brake light from turning on. To check the brake switch, disconnect the wires from the switch and apply the brakes. If the light does not turn on, the brake switch needs to be replaced.
Fixing
Once you have identified the cause of the problem, you can fix the bike brake light.
Replace the light bulb:
If the light bulb is burnt out, simply replace it with a new one.
Replace the fuse:
If the fuse is blown, replace it with a new one.
Repair or replace the wiring:
If the wiring is damaged, you can repair it or replace it with new wiring.
Replace the brake switch:
If the brake switch is not working properly, replace it with a new one.
Once you have fixed the bike brake light, it should be working properly again.
Prevention
To prevent your bike brake light from malfunctioning, you can take a few steps to prevent damage.
Use high-quality light bulbs:
Using high-quality light bulbs will help to extend their lifespan and reduce the risk of them burning out.
Protect the light bulb from damage:
The light bulb on your bike is exposed to the elements, so it is important to protect it from damage. You can do this by using a lens cover or by wrapping the light bulb in electrical tape.
Inspect the brake light regularly:
Inspecting the brake light regularly will help you to identify any problems early on. If you notice that the light is not working properly, you can fix it before it causes a major problem.
You May Like to Read: Bike Disc Brake Not Working
